Fast Flow Fluid warmer H1200

Description The Level 1® H-1200 Fast Flow Fluid Warmer (Fluid Warmer) is an I.V. fluid warmer with pressure chambers, air detection, and automatic clamping capability. I.V. fluid and/or blood products are warmed through the use of a sealed heat exchanger through which a recirculating solution flows. Pressure Chambers apply pressurization and deliver the fluids at a fast flow rate. The Air Detector/Clamp monitors for the presence of air in the disposable Gas Vent/Filter Assembly. This non-invasive method employs single-use, disposable administration sets that include a Gas Vent/Filter Assembly and Heat Exchanger. When air is detected in the Gas Vent/Filter Assembly, the Air Detector/Clamp closes off the patient line and alerts operators to the presence of air with audible and visual alarms. An ultrasonic signal continually passes through the fluid filled Gas Vent/Filter Assembly (GV/FA). As a bolus of air displaces the fluid in the GV/FA, the ultrasonic signal is broken and the clamp closes, stopping the air before it enters the patient line. Audible and visual alarms are activated, notifying the user that the fluid flow has stopped. Clearing the bolus of air and restoring the fluid flow are quickly accomplished without disconnecting from the patient. Disposable Administration Sets The installation, set up, and replacement of Level 1® Fast Flow I.V. Disposable Administration Sets (Disposable Sets) follows a four-step sequence that corresponds to numbered blocks on the device. Disposable Sets available for use on the Level 1® H-1200 Fast Flow Fluid Warmer are listed below. Pover 110 v.